direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Page Content

Information for radio amateurs

This page is dedicated to the amateur radio community and lists information related to our active satellite missions. 

Want to get involved? Find information on what we offer at TU Berlin, including a list of our operators and hams who we helped to obtain their license.

LEOP and Commissioning Timeline for SALSAT

  • 2020-09-28 11:20:32 UTC Launch at Plesetsk Cosmodrome
  • 2020-09-28 14:46:12 UTC Separation
  • 2020-09-28 23:11:37 UTC First contact (callsign DP0WER)
  • ...

See the TUBIX10-COM document for Communication System Specifications incl. preliminary LEOP TLE. To import the TLE data directly into your orbit prediction tool you can use this source hosted by DK0TU.

Active Missions

Overview of active missions
Mission
NORAD
Frequency
Modulation
Baudrate
Callsign
BEESAT-1
35933
435.950 MHz
GMSK
4k8
DP0BEE
BEESAT-2
39136
435.950 MHz
GMSK
4k8 or 9k6
DP0BEF
BEESAT-3
39135
435.950 MHz
GMSK
4k8
DP0BEG
BEESAT-4
41619
435.950 MHz
GMSK
4k8 or 9k6
DP0BEH
BEESAT-9
44412
435.950 MHz
GMSK
4k8 or 9k6
DP0BEM
BEESAT-10
t.b.d.
435.950 MHz
GMSK
1k2
DP0BEN
BEESAT-11
t.b.d.
435.950 MHz
GMSK
1k2
DP0BEO
BEESAT-12
t.b.d.
435.950 MHz
GMSK
1k2
DP0BEP
BEESAT-13
t.b.d.
435.950 MHz
GMSK
1k2
DP0BEQ
TechnoSat
42829
435.950 MHz
GMSK
4k8
DP0TBA
S-Net A
43188
435.950 MHz
AFSK
1k2
DP0TBB
S-Net B
43187
435.950 MHz
AFSK
1k2
DP0TBC
S-Net C
43189
435.950 MHz
AFSK
1k2
DP0TBD
S-Net D
43186
435.950 MHz
AFSK
1k2
DP0TBE
SALSAT
tbd.
435.950 MHz
AFSK
1k2
DP0WER

All missions use half-duplex communications. Therefore, the above listed frequencies are valid for Up- and Downlink.

BEESATs, TechnoSat & TUBIN

Decoding Tools

A GNU Radio out of tree (OOT) module is published on GitHub which can be used to demodulate raw data frames from our satellites. It demodulates the bit stream modulated with GMSK and also the Mobitex data-link layer protocol. Additionally, the Soundmodem from UZ7HO supports demodulation of Mobitex frames. 

To launch the GNU Radio modules, use the flowcharts provided in the grc subfolder of the GitHub repository. For BEESAT-1 use tnc_b1.grc and tnc_nx.grc for BEESAT-2,-3,-4 and -9. The flowcharts provide a TCP sever connection on port 9000 which is used to transmit demodulated messages to other programs.
The format of the messages is described in the files below.

General Information

The standard baudrate is 4800 bps but can be switched to 9600 bps for increased channel capacity at higher elevations. Each transmission at the higher baudrate is announced by a small 4800 bps header to allow for adaptive receiver re-configuration. The output power of the satellites is 27 dBm (0.5 W) for all BEESATs and 30 dBm (1 W) for TechnoSat using quarter-wave monopole antennas with toroidal radiation pattern.

On the data-link layer - as described by the OSI model - all BEESATs and TechnoSat make use of the Mobitex protocol. The modem chip used on BEESAT-1 to -4 is CML CMX909b. It includes scrambling and interleaving features and forward error correction is also performed internally.

The transport layer uses individual frame headers for addressing multiple satellites and for handling variable length messages. Additionally, backward error correction adds to data consistency and transmission safety when needed. Both protocol features are realized by the attached microcontroller of the on-board and groundstation TNC.

TUBIN will be launched in 2020 and use the same telemetry format as TechnoSat. Any changes in the format will be announced prior to launch, however the modulation and coding will not change and the same TNC/ gr-tools can be used as for BEESAT and TechnoSat.

Terminal Node Controller (TNC)

Lupe

Telecommand uplink and telemetry downlink always passes the terminal node controllers which are responsible for failure tolerant communication between the on-board computer and the groundstation's telemetry and telecommand server.

You may find a schematics of the TNC in the download section of this page for reference.

TUBiX10: Mission S-NET and SALSAT

The telemetry format description of TUBiX10 protocol, currently implemented in mission S-NET and SALSAT, can be download under "Files for Download". 

Submitting Telemetry Frames

The Chair of Space Technology operates a telemetry collector server to receive raw data frames via the Simple Downlink Share Convention (SiDS). Frames can be submitted through the URL http://fachgebiet.rft.tu-berlin.de/ham/telemetry/send

Helpful Links

GNU Radio Modules: github.com/kappiman/beesat-sdr
Also included in gr-satellites repository by EA4GPZ

Telemetry Collector Server: fachgebiet.rft.tu-berlin.de/ham/telemetry/send

Telemetry Decoders by DK3WN: www.dk3wn.info/p/?page_id=75524

Zusatzinformationen / Extras

Quick Access:

Schnellnavigation zur Seite über Nummerneingabe

Auxiliary Functions

Contact

Sascha Kapitola