direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Page Content

There is no English translation for this web page.

Prof. Dr.-Ing. Enrico Stoll

Lupe

 

Leiter des Fachgebietes Raumfahrttechnik

Raum: F 515
Telefon: +49 30 314-21339
Email: e.stoll@...

 

Follow me on LinkedIn

Follow me on ResearchGate.

 

 

Experience

Education & Acadmia
2009
Post-Doctoral Fellow
Space Systems Laboratory
Massachusetts Institute of Technology, USA

2005-
2011
Bachelor of Science, B.Sc. 
Mathematics, University of Hagen
Technical University of Munich, Germany
2005-
2008
Doctor of Engineering, Dr.-Ing.
Aerospace Engineering
Technical University of Munich, Germany
1999-
2004
Diploma of Engineering, Dipl.-Ing.
Aeronautical and Aerospace Engineering
Technical University of Dresden, Germany
Moscow Aviation Institute, Russia
University of New South Wales, Australia

Experience
2021- 
Chairholder of Space Technology
TU Berlin, Germany
2014-
2021
Full Professor
Head of the Institute of Space Systems,
Technical University of Braunschweig, Germany

2012-
2013
Guest Lecturer
Free University of Berlin, Germany
Intelligent Systems and Robotics Group

2010-
2014
Systems Engineer
RapidEye / BlackBridge AG (today: Planet Labs), Germany

Publications

Journals 

[J45] M. Nussbaum, E. Schafer, Z. Yoon, D. Keil, and E. Stoll, “Spectral Light Curve Simulation for Parameter Estimation from Space Debris,” Aerospace, vol. 9, no. 8, p. 403, Jul. 2022.

[J44] Bauer, A., Burnicki, A., Eßer, M., Kesten, Ä., Manca, E., Meyners, N., Kirsch, T., Siebert, T., Stankovic, A., Grefen, B., Stoll, E., Fluids, vol. 7, no. 8, p. 265, Aug. 2022.

[J43] M. K. Ben-larbi, R. Hensel, G. Atzeni, E. Arzt, and E. Stoll, “Orbital debris removal using micropatterned dry adhesives : Review and recent advances,” Prog. Aerosp. Sci., vol. 134, no. July, p. 100850, 2022.

[J42] J. Bartholomäus, M. F. Barschke, P. Werner, and E. Stoll, “Acta Astronautica Initials results of the TUBIN small satellite mission for wildfire detection,” Acta Astronaut., vol. 200, no. June, pp. 347–356, 2022.

[J41] M. Schubert, L. Böttcher, E. Gamper, P. Wagner, and E. Stoll, “Detectability of space debris objects in the infrared spectrum,” Acta Astronaut., vol. 195, no. February, pp. 41–51, 2022.

[J40] J. Yang, Y. Duan, M. K. Ben-Larbi, and E. Stoll, “Potential Field-Based Sliding Surface Design and Its Application in Spacecraft Constrained Reorientation,” J. Guid. Control. Dyn., vol. 44, no. 2, pp. 399–409, Feb. 2021.

[J39] B. Grefen, J. Becker, S. Linke, and E. Stoll, “Design, Production and Evaluation of 3D-Printed Mold Geometries for a Hybrid Rocket Engine,” Aerospace, vol. 8, no. 8, p. 220, Aug. 2021.

[J38] Reitz, B., Lotz, C., Gerdes, N., Linke, S., Olsen, E., Pflieger, K., Sohrt, S., Ernst, M., Taschner, P., Neumann, J., Stoll, E. Overmeyer, L. , “Additive Manufacturing Under Lunar Gravity and Microgravity,” Microgravity Sci. Technol., vol. 33, no. 2, pp. 1–12, 2021.

[J37] B. Grefen, J. Becker, S. Linke, and E. Stoll, “Design , Production and Evaluation of 3D-Printed Mold Geometries for a Hybrid Rocket Engine,” Aerospace, vol. 8, no. 220, 2021.

[J36] J. Yang, Y. Duan, M. K. Ben-Larbi, and E. Stoll, “Potential field-based sliding surface design and its application in spacecraft constrained reorientation,” J. Guid. Control. Dyn., vol. 44, no. 2, pp. 399–409, 2021.

[J35] J. Yang, Y. Khedar, M.L. Ben-Larbi, J. Backhaus, A. Lampert, U. Bestmann, E. Stoll, “Concept and feasibility evaluation of distributed sensor-based measurement systems using formation flying multicopters,” Atmosphere, vol. 12, no. 7, pp. 1–19, 2021.

[J34] B. Grzesik Baumann, T. Walter, F. Flederer, F. Sittner, E. Dilger, S. Gläsner, J.L. Kirchler, M. Tedsen, S. Montenegro, E. Stoll, “Innocube—a wireless satellite platform to demonstrate innovative technologies,” Aerospace, vol. 8, no. 5, 2021.

[J33] S. Linke, A. Voß, M. Ernst, P.A. Taschner, J. Baasch, S. Stapperfend, N. Gerdes, J. Koch, P. Weßels, J. Neumann, L. Overmeyer, E. Stoll, “Two-Dimensional Laser Melting of Lunar Regolith Simulant Using the MOONRISE Payload on a Mobile Manipulator,” 3D Print. Addit. Manuf., vol. 33, no. 25, 2021.

[J32] C. Lotz, N. Gerdes, R. Sperling, S. Lazar, S. Linke, J. Neumann, E. Stoll, W. Ertmer, L. Overmeyer, “Tests of additive manufacturing and other processes under space gravity conditions in the einstein-elevator,” Logist. J., vol. 2020, pp. 9–14, 2020.

[J31] E. Stoll, P. Härke, S. Linke, F. Heeg, and S. May, “The Regolith Rocket - a hybrid rocket using lunar resources,” Acta Astronaut., vol. 179, pp. 509–518, 2021.

[J30] M. K. Ben Larbi, T. Jusko, and E. Stoll, “Input-Output Linearized Spacecraft Formation Control via Differential Drag Using Relative Orbital Elements,” Adv. Sp. Res., 2020.

[J29] M. K. Ben Larbi et al., “Towards the automated operations of large distributed satellite systems. Part 2: Classifications and tools,” Adv. Sp. Res., 2020.

[J28] M. K. Ben Larbi et al., “Towards the automated operations of large distributed satellite systems. Part 1: Review and paradigm shifts,” Adv. Sp. Res., 2020.

[J27] F. Heeg, L. Kilzer, R. Seitz, and E. Stoll, “Design and Test of a Student Hybrid Rocket Engine with an External Carbon Fiber Composite Structure,” MDPI Aerosp., pp. 1–19, 2020.

[J26] J. Yang, Y. Duan, and E. Stoll, “Artificial Potential Field-Based Sliding Mode Control for Spacecraft Reorientation with Attitude Constraints,” J. Guid. Control. Dyn., 2020.

[J25] A. J. R. Lopez-Arreguin, B. Gundlach, and E. Stoll, “Do lunar rover wheels sink equally on Earth and Moon?,” Results Phys., vol. 15, 2019.

[J24] S. Linke et al., “TUBS-M and TUBS-T based modular Regolith Simulant System for the support of lunar ISRU activities,” Planet. Space Sci., vol. 180, no. March, p. 104747, 2020.

[J23] B. Grzesik, G. Liao, D. Vogt, S. Linke, L. Froböse, A. Kwade, E. Stoll, "Integration of energy storage functionalities into fiber reinforced spacecraft structures", Acta Astronautica, vol. 166, no. March 2019, pp. 172–179, 2020.

[J22] A. J. R. Lopez-arreguin, D. Bock, E. Stoll, and M. Tajmar, “Addressing the effects of background plasma and wake formation on the UWE-IV CubeSat using a 3D Particle In Cell code,” Results Phys., vol. 15, 2019, doi.org/10.1016/j.rinp.2019.102442.

[J21] J. Yang, E. Stoll, "Adaptive Sliding Mode Control for Spacecraft Proximity Operations Based on Dual Quaternions", Journal of Guidance, Control, and Dynamics, Published Online: 25 Jul 2019, doi.org/10.2514/1.G004435

[J20] L. Schmidt, E. Gamper, T. Feuerle, and E. Stoll, “Evaluation of the impact on European air traffic by uncontrolled reentering spacecraft with initial state uncertainty,” CEAS Aeronaut. J.(2019), doi.org/10.1007/s13272-019-00405-1.

[J19] V. Braun, H. Klinkrad, and E. Stoll, “Orbit information of predetermined accuracy and its sharing in the space situational awareness context,” Acta Astronaut., Vol. 159, pp. 410-417, Jun. 2019.

[J18] A. J. R. Lopez-Arreguin, E. Stoll, and J. Letschnik, “Modeling degraded performance metrics of optical amplifiers under radiation,” Results Phys., vol. 12, pp. 1805–1808, Mar. 2019.

[J17] V. Schaus, E. M. Alessi, G. Schettino, A. Rossi, and E. Stoll, “On the practical exploitation of perturbative effects in low Earth orbit for space debris mitigation,” Adv. Sp. Res., vol. 63, no. 7, pp. 1979–1991, Apr. 2019.

[J16] A. Horstmann et al., “Survey of the Current Activities in the Field of Modeling the Space Debris Environment at TU Braunschweig,” Aerospace, vol. 5, no. 2, p. 37, Apr. 2018.

[J15] B. Gundlach et al., “The tensile strength of ice and dust aggregates and its dependence on particle properties,” Mon. Not. R. Astron. Soc., vol. 479, no. 1, pp. 1273–1277, Sep. 2018.

[J14] A. Rossi et al., “ReDSHIFT: A Global Approach to Space Debris Mitigation,” Aerospace, vol. 5, no. 2, p. 64, Jun. 2018.

[J13] N. Gerdes et al., “Selective Laser Melting for processing of regolith in support of a lunar base,” J. Laser Appl., vol. 30, no. 3, p. 032018, Aug. 2018.

[J12] F. K. Chun et al., “A New Global Array of Optical Telescopes: The Falcon Telescope Network,” Publ. Astron. Soc. Pacific, vol. 130, no. 991, p. 095003, Jul. 2018.

[J11] M. K. Ben Larbi and E. Stoll, “Spacecraft formation control using analytical finite-duration approaches,” CEAS Sp. J., vol. 10, no. 1, pp. 63–77, Mar. 2018.

[J10] A. Lopez-Arreguin et al., “3D4 Space - Advanced Systems, Components, and Novel Methods for Planetary Exploration with Wheeled Mobile Robots,” J. Sp. Explor., vol. 6, no. 3, pp. 1–14, 2017.

[J09] J. Radtke, C. Kebschull, and E. Stoll, “Interactions of the space debris environment with mega constellations—Using the example of the OneWeb constellation,” Acta Astronaut., vol. 131, no. 2000, pp. 55–68, Feb. 2017.

[J08] C. Kebschull, P Scheidemann, S Hesselbach, J Radtke, V Braun, H Krag, E. Stoll, “Simulation of the space debris environment in LEO using a simplified approach,” Adv. Sp. Res., vol. 59, no. 1, pp. 166–180, Jan. 2017.

[J07] J. Radtke and E. Stoll, “Comparing long-term projections of the space debris environment to real world data – Looking back to 1990,” Acta Astronaut., vol. 127, pp. 482–490, Oct. 2016.

[J06] E. Stoll, A. Brunn, K. Shahid, and A. Horstmann, “The optimization of memory management in Earth observation constellations,” Acta Astronaut., Dec. 2015.

[J05] E. Stoll, J. Letschnik, M. Wilde, A. Saenz-Otero, R. Varatharajoo, and J. Artigas, “The future role of relay satellites for orbital telerobotics,” Adv. Sp. Res., vol. 50, no. 7, pp. 864–880, 2012.

[J04] E. Stoll, S. Jaekel, J. Katz, A. Saenz-Otero, and R. Varatharajoo, “SPHERES interact-Human-machine interaction aboard the International Space Station,” J. F. Robot., vol. 29, no. 4, pp. 554–575, Jul. 2012.

[J03] E. Stoll et al., “On-orbit servicing- Exploration and Manipulation Capabilities of Robots in Space,” IEEE Robot. Autom. Mag., vol. 16, no. 4, pp. 29–33, Dec. 2009.

[J02] J. Harder, E. Stoll, M. Schiffner, M. Pfeiffer, and U. Walter, “A compact, light-weight high data-rate antenna system for remote-sensing orbiters and space exploration,” Acta Astronaut., vol. 65, no. 11–12, pp. 1738–1744, 2009.

[J01] E. Stoll et al., “Ground verification of the feasibility of telepresent on-orbit servicing,” J. F. Robot., vol. 26, no. 3, pp. 287–307, Mar. 2009.

 

Book Chapters

[B03] Wiedemann, C., Horstmann, A., Böttcher, L., Soggeberg, K., Gamper, E., Lorenz, J., Schubert, M., Stoll, E., Space Debris: Technical Aspects, in: Benkö, M., Schrogl, K., (eds.), Outer Space – Future for Humankind, Issues of Law and Policy, Series: Essential Air and Space Law, No. 26, ISBN 9789462362253, November 2021, Eleven International Publishing, pp. 191-211.

[B02] E. Stoll, J. Letschnik, and C. Kebschull, “Ground-based satellite tracking,” in Nano-Satellites: Space and Ground Technologies, Operations and Economics, R. Atem de Carvalho, J. Estela, and M. Langer, Eds. Wiley, 2020.

[B01] E. Stoll, A. Saenz-Otero, and B. Tweddle, “Multimodal Human Spacecraft Interaction in Remote Environments,” in Lecture Notes in Electrical Engineering, vol. 68, S.-I. Ao, B. Rieger, and M. A. Amouzegar, Eds. Springer, 2010, pp. 1–15.

 

Peer-Reviewed

[PR07] A. T. D. Jonckers, O. Tauscher, E. Stoll, “Feasibility Study of Large-Format, Freeform 3D Printing for on-Orbit Additive Manufacturing D.,” in International Solid Freeform Fabrication Symposium, pp. 1508–1526, virtual, Aug. 2021.

[PR06] K. Hofner, A. Vahl, and E. Stoll, “Impact of satellite reliability and global data traffic on the profitability of communication constellations,” in  RAMS - Reliability and Maintainability Symposium, Orlando, USA, 2019.

[PR05] K. Höfner, A. Vahl, and E. Stoll, “Cost-Efficient Satellite Constellation Design by Network Reliability Analysis,” in RAMS - Reliability and Maintainability Symposium, Reno, USA, Jan. 2018.

[PR04] E. Stoll, B. D’Souza, B. B. Virgili, K. Merz, and H. Krag, “Operational collision avoidance of small satellite missions,” in IEEE Aerospace Conference, Big Sky, USA, Mar. 2013.

[PR03] E. Stoll and A. Saenz-Otero, “The control of inspector satellites via relay satellites,” in IEEE Aerospace Conference, Big Sky, USA, Mar. 2012.

[PR02] E. Stoll, H. Konstanski, C. Anderson, K. Douglass, and M. Oxfort, “The RapidEye constellation and its data products,” in IEEE Aerospace Conference, Big Sky, USA, Mar. 2012.

[PR01] E. Stoll and U. Walter, “Concept of an Algorithm to Determine the Signal Delay Time for Telepresence Space Applications,” in IEEE Aerospace Conference, Big Sky; USA, Mar. 2006.

 

Conferences

 [C107] Grzesik, B., Gläsner, S., Walter, T., Baumann, T., Felix, S., Frank, F., Dilger, E., Montenegro, S., Stoll, E.,  “InnoCube - Technology Demonstration of a Wireless Satellite Bus and An Experimental Solid-State Battery,” in 4S Symposium on Small Satellites, Systems and Services, Villamoura, Portugal, May 2022.

[C106] L. A. Fernández, C. Wiedemann, V. Braun, and E. Stoll, “Reliability estimation methodology for Liquid Rocket Engines,” in European Conference for Aerospace Sciences , EUCASS, Lille, France, 2022.

[C105] Ruiza, I.A., Fernández, L.A., Oliveiraa, A.D.C., Guadagninid, J., Lantelmee, M., Bartolie, N., Chedevergnee, F., Zaiacomod, G.D.D., Lavagnaa, M., Prevereaude, Y., Stoll, E., “Mission Analysis, GNC and ATD for Reusable Launch Vehicles within ASCenSIon: multi-orbit multipayload injection, re-entry and safe disposal,” in International Astronautical Congress, IAC,Dubai, UAE, Oct. 2021. 

[C104] Freymuth, J., Vu, H.Q., Pust, M., Lange, S., Wüstenberg, P., Balke, A., Vanichangkul, T., Stoll, E. , “SALSAT: First year in orbit - Preliminary assessment of the nanosatellite bus, subsystems, and the payloads,” in International Astronautical Congress, IAC,Dubai, UAE, Oct. 2021. 

[C103] Blondel-Canepari, L., Ruiz I.A., Fernández, L.A., Gelain, R., Glaser, C., Valles, L.O., Sarritzu, A.J., Apel, U. Hendrick, P., Hijlkema, J., Lavagna, M., Stoll, E. ,Tajmar, M. Pasini, A., “Conceptual study of technologies enabling novel green expendable upper stages with multi-payload/multi-orbit injection capability,” in International Astronautical Congress, IAC,Dubai, UAE, Oct. 2021. 

[C102] M. Schubert, C. Kebschull, S. Horstmann, E.Stoll, “Analysis of Different Process Noise Models in Typical Orbit,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2021.

[C101] L. A. Fernandez, J. Radtke,  E. Stoll, “Impact of Collosion Avoidance Manoeuvres on Large Satellite Constellations,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2021.

[C100] E. Banken, V.E. Schneider, L.  Pohl, J. Kniep, R. Ströbel, M.K. Ben-Larbi, E. Stoll, L. Pambaguian, C. Jahn, J. Oeffner, Jet al., “Assessing Bioinspaced Concepts for Space Debris Removal and Evaluating their Feasibility for Simple Demonstrtor Design,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2021.

[C099] C. Wiedemann et al., “IMPROVEMENTS AND UPDATES IN MASTER-8,” in International Astronautical Congress, IAC, online, Oct. 2020.

[C098] A. Gloder et al., “ASCenSIon: An Innovative Network to Train the Space Access Leaders of Tomorrow,” in International Astronautical Congress, IAC, online, Oct. 2020.

[C097] C. Wiedemann et al., “Das Weltraummüllmodell Master-8,” in Deutscher Luft- und Raumfahrtkongress, online, Sep. 2019.

[C096] A. Horstmann, H. Krag, and E. Stoll, “Providing Flux Uncertainties in ESA-MASTER : The Accuracy of the 1cm Population,” in Orbital Debris Conference, Sugar Land, USA, Dec. 2019.

[C095] M. Von Unwerth, A. Voß, S. Stapperfend, S. Linke, and E. Stoll, “Simulation of the Robotic Lunar Prototype MIRA3D,” in Deutscher Luft- und Raumfahrtkongress, DLRK, Darmstadt, Germany, Sep. 2019.

[C094] V. Schaus et al., “Automated Constellation Management with Self-regulating Data-Economic Actors,” in International Astronautical Congress, IAC, Washington, USA, Oct. 2019.

[C093] A. Rossi et al., “The H2020 Redshift project: A successful European effort towards space debris mitigation,” in International Astronautical Congress, IAC, Washington, USA, Oct. 2019.

[C092] E. Gamper, L. Schmidt, T. Feuerle, and E. Stoll, “Appoaches to and Methods for the Integration of Space Traffic into Air Traffic,” in International Astronautical Congress, IAC, Washington, USA, Oct. 2019.

[C091] D. Krupke et al., “Automated Data Retrieval from Large-Scale Satellite Swarms,” in International Conference on Automation Science and Engineering, Vancouver, Canada, Aug. 2019.

[C090] E. Gamper, C. Kebschull, and E. Stoll, “Statistical orbit determination using the ensemble kalman filter,” in NEO and Debris Detection Conference, Darmstadt, Germany, Jan. 2019.

[C089] M. K. Ben Larbi, T. Jusko, and E. Stoll, “Spacecraft Formation Feed-Forward Control Via Differential Drag Using Relative Orbital Elements,” in International Workshop on Satellite Constellations and Formation Flying, Glasgow, Scotland, Jul. 2019.

[C088] C. Wiedemann et al., “Die Weltraummüll-Population des neuen MASTER_Modells,” in Deutscher Luft- und Raumfahrtkongress, DLRK, Friedrichshafen, Germany, 2018.

[C087] A. Voß, S. Linke, and E. Stoll, “MIRA3D – a robotic prototype for additive layer manufacturing on the Moon,” in International Astronautical Congress, Bremen, Germany, Oct. 2018.

[C086] C. Trentlage, M. K. Ben Larbi, C. de alba-Padilla, J. Yang, and E. Stoll, “The ELISSA Laboratory: Free-Floating Satellites for Space-Related Research,” in Deutscher Luft- und Raumfahrtkongress, DLRK, Friedrichshafen, Germany, Sep. 2018.

[C085] C. Wiedemann et al., “Particle flux analysis with the updated MASTER model,” in International Astronautical Congress, Bremen, Germany, Oct. 2018.

[C084] B. Grzesik et al., “Integration of energy storage functionalities into a fiber reinforced spacecraft structures,” in International Astronautical Congress, Bremen, Germany, Oct. 2018.

[C083] C. Trentlage and E. Stoll, “A Biomimetic Docking Device For Passively Flexible Attachment , Rigidization and Load Sharing for Handling Uncooperative Targets,” in IEEE International Conference on Advanced Robotics and Mechatronics, Singapore, Jul. 2018.

[C082] K. Soggeberg, J. Radtke, C. Wiedemann, and E. Stoll, “Design of a BAU scenario including current trends in the space market,” in Committee on Space Research (COSPAR) Scientific Assembly - Abstract id. PEDAS.1-14-18, Pasadena, USA, Jul. 2018.

[C081] S. Müller and E. Stoll, “Near-real-time Continuous Filtering of Sensor Measurements using Data Stream Management Systems,” in Advanced Maui Optical and Space Surveillance Technologies (AMOS) Conference, Maui, USA, Sep. 2018.

[C080] J. Yang and E. Stoll, “Sliding Mode Control for Six Degrees-of-Freedom Spacecraft Proximity Operations Based on Dual Quaternions,” in AAS/AIAA Astrodynamics Specialist Conference, Snowbird, USA, Aug. 2018.

[C079] C. Wiedemann et al., “The Validation of the MASTER Model,” in Committee on Space Research (COSPAR) Scientific Assembly, Pasadena, USA, Jul. 2018.

[C078] A. Voß, L. Kuhr, R. Freund, S. Linke, and E. Stoll, “Requirements for a Mobile Lunar Prototype for Additive Layer Manufacturing,” in International Symposium on Artificial Intelligence, Robotics and Automation in Space (i-SAIRAS ), Madrid, Spain, Jun. 2018.

[C077] S. Linke et al., “TUBS-M and TUBS-T - new lunar regolith simulants adaptable to local lunar surface characteristics,” in International Astronautical Congress, Bremen, Germany, Oct. 2018.

[C076] K. Höfner, A. Vahl, and E. Stoll, “Innovative Architecture Optimization Approach for Highly Reliable Satellite Attitude Control,” in International Astronautical Congress, Bremen, Germany, Oct. 2018.

[C075] A. Rossi et al., “Results from the H2020 ReDSHIFT project: a global approach to space debris mitigation,” in International Astronautical Congress, Bremen, Germany, Oct. 2018.

[C074] C. Trentlage, E. Stoll, R. Hensel, R. Holzbauer, and A. Makaya, “Development of gecko-inspired adhesive materials for space applications,” in International Astronautical Congress, Bremen, Germany, Oct. 2018.

[C073] E. Stoll, C. de alba-Padilla, A. Tienken, and S. Rediske, “A highly redundant compact robot manipulator supporting orbital robotics on CubeSats,” in 4S Symposium on Small Satellites, Systems and Services, Mai, May 2018, no. June.

[C072] B. Grzesik, E. Stoll, J. De Wit, A. Dietz, and M. Doetz, “Manufacturing and preliminary testing of a scalable deployable ultra-lightweight space telescope,” in 4S Symposium on Small Satellites, Systems and Services, Sorrento, Italy, May 2018.

[C071] M. K. Ben Larbi, B. Grzesik, J. Radtke, C. Trentlage, and E. Stoll, “Active Debris Removal for Mega Constellations: CubeSat Possible?,” in International Workshop on Satellite Constellations and Formation Flying, Boulder, USA, Jun. 2017.

[C070] C. Wiedemann, E. Gamper, A. Horstmann, V. Braun, and E. Stoll, “The Contribution of NAK Droplets to the Space Debris Environment,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2017, no. 1.

[C069] A. Rossi et al., “The H2020 Project ReDSHIFT: Overview, First Results and Perspectives,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2017.

[C068] A. Horstmann and E. Stoll, “Investigation of Propagation Accuracy Effects within the Modeling of Space Debris,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2017.

[C067] S. Müller, C. Kebschull, and E. Stoll, “Evaluation of Data Stream Management Systems in the Context of Space Surveillance and Tracking,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2017.

[C066] S. Müller and E. Stoll, “Data Stream-Centric SST System Architecture Enhancement,” in IAA Conference on Space Situational Awareness, Orlando, USA, Nov. 2017.

[C065] H.-J. Zachrau, M. Becker, E. Stoll, I. Retat, D. Roascio, and D. Sternberg, “ISS Spheres Tehther Dynamics Experiments Evaluation of Tethered Actice Debris Removal Issues,” in ISS R&D Conference, Washington, USA, Jul. 2017.

[C064] K. Höfner, A. Vahl, and E. Stoll, “Satellite Architecture Optimization Adapted Reliabilty Analyses from Commercial Aviation,” in International Astronautical Congress, Adelaide, Australia, Sep. 2017.

[C063] C. Wiedemann, J. Radtke, J. Yang, and E. Stoll, “Considering Cost of De-Orbiting Maneuvers in Long-Term Scenarions,” in International Astronautical Congress, Adelaide, Australia, Sep. 2017.

[C062] J. Radtke, E. Stoll, H. Lewis, J. Beck, and B. B. Virgili, “To Launch or not to Launch - Responsibilities of Small Satellites for a Sustainable Space Environment,” in International Astronautical Congress, Adelaide, Australia, Sep. 2017.

[C061] A. J. R. López-arreguín, B. Grzesik, and E. Stoll, “BeoCube: A CubeSat for a Laser Ranging Experiment,” in International Astronautical Congress, Adelaide, Australia, Sep. 2017.

[C060] B. Grzesik, P. Mindermann, E. Stoll, S. Linke, A. Dietz, and S. Frey, “Alignment mechanism and system concept of a deployable ultra-lightweight space telescope for a 1U CubeSat demonstrator,” in International Astronautical Congress, Adelaide, Australia, Sep. 2017.

[C059] C. Kebschull, L. Reichstein, and E. Stoll, “A Simulation Environment to Determine the Performance of SSA Systems,” in Advanced Maui Optical and Space Surveillance Technologies, AMOS, Maui, USA, Sep. 2017.

[C058] E. Stoll, S. Hesselbach, S. Linke, A. J. R. López-arreguín, and J. Block, “Towards a long-term Lunar Environment Observatory,” in IAA Symposium on the Future of Space Exploration, Turin, Italy, Jun. 2017.

[C057] C. Wiedemann, E. Gamper, A. Horstmann, V. Braun, and E. Stoll, “Der aktuelle Beitrag der NAK Tropfen zum Weltraummüll,” in Deutscher Luft- und raumfahrtkongress, DLRK, Munich, Germany, Sep. 2017.

[C056] C. de alba-Padilla, C. Trentlage, and E. Stoll, “Vision based robot control for grasping space applications using gecko material,” in Advanced Space Technologies in Robotics and Automation, ASTRA, Leiden, The Netherlands, Jun. 2017, no. 1.

[C055] A. Horstmann, E. Stoll, and H. Krag, “A Validation Method of ESA’s MASTER 1 cm Population in Low Earth Orbit,” in Advanced Maui Optical and Space Surveillance Technologies, AMOS, Maui, USA, Sep. 2017.

[C054] C. Trentlage, T. Stelzer, E. Stoll, and D. Roascio, “Capture Capability Eenhancement of a Grasping device for Typical ADR Targets Through Biomimetic Dry Adhesives,” in Advanced Space Technologies in Robotics and Automation, ASTRA, Leiden, The Netherlands, Jun. 2017.

[C053] E. Stoll, P. Mindermann, B. Grzesik, S. Linke, A. Dietz, and S. Frey, “OCULUS - Optical Coatings for Ultra Lightweight Robust Spacecraft Structures,” in IAA Symposium on Small Satellites for Earth Observation, Berlin, Germany, Apr. 2017.

[C052] J. Radtke, E. Stoll, H. Lewis, and B. B. Virgili, “The Impact of the Increase in Small Satellite Launch Traffic on the Long-Term Evolution of the Space Debris Environment,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2017.

[C051] V. Schaus et al., “Results if the Long-Term Simulations on Passive Means to Reduce the Impact of Space Debris,” in European Conference on Space Debris, Darmstadt, Germany, Apr. 2017.

[C050] M. Becker, E. Stoll, and I. Retat, “Tether force transmission capabilities for applications at Active Debris Removal Missions,” in International Astronautical Congress, IAC, Guadalajara, Mexico, Sep. 2016.

[C049] J. Becker, B. Grefen, and E. Stoll, “Results of the Leonis Project and Launch Campaign Within the STERN Programme,” in Deutscher Luft- und Raumfahrtkongress, Braunschweig, Germany, Sep. 2016.

[C048] M. Becker, E. Stoll, and I. Retat, “Tether Dynamics Toolbox – Simulation of Tethered Space Systems in Active Debris Removal Missions,” in AIAA Space 2016, Long Beach, USA, Jun. 2016.

[C047] T. Jusko and E. Stoll, “Scalable Trajectory Optimization Based on Bézier Curves,” in Deutscher Luft- und Raumfahrtkongress, Braunschweig, Germany, Sep. 2016.

[C046] V. Braun, H. Klinkrad, and E. Stoll, “Orbit information of predetermined accuracy and its sharing in the SST context,” in AIAA Space 2016, Long Beach, USA, Jun. 2016.

[C045] C. Wiedemann, E. Gamper, A. Horstmann, V. Braun, and E. Stoll, “Analyse Möglicher Partikeleinschläge Auf Die Reaktoren Der Satelliten Kosmos 1818 Und 1867,” in Deutscher Luft- und Raumfahrtkongress, Braunschweig, Germany, Sep. 2016.

[C044] M. K. Ben Larbi and E. Stoll, “Spacecraft formation control using analytical integration of Gauss’ variational equations,” in International Conference on Astrodynamics Tools and Techniques, Darmstadt, Germany, Sep. 2016.

[C043] B. Grzesik, U. Bestmann, and E. Stoll, “BEOcube - a platform for flexible precise orbit determination,” in 4S Symposium on Small Satellites, Systems and Services, Valetta, Malta, May 2016.

[C042] C. Trentlage, P. Mindermann, M. K. Ben Larbi, and E. Stoll, “Development and Test of an Adaptable Docking Mechanism Based on Mushroom-Shaped Adhesive Microstructures,” in AIAA SPACE 2016, Long Beach, USA, Sep. 2016.

[C041] M. K. Ben Larbi, B. Grzesik, C. Trentlage, J. Yang, K. Höfner, and E. Stoll, “Algorithm and Technology Development for Active Debris Removal At the Institute of Space Systems,” in Deutscher Luft- und Raumfahrtkongress, Braunschweig, Germany, Sep. 2016.

[C040] C. Wiedemann, J. Lorenz, J. Radtke, C. Kebschull, A. Horstmann, and E. Stoll, “Space debris - modeling and detectability,” in International Symposium on High Power Laser Systems and Application, Gmunden, Austria, Sep. 2016.

[C039] C. Wiedemann, E. Gamper, A. Horstmann, V. Braun, and E. Stoll, “Release of liquid metal droplets from Cosmos 1818 and 1867,” in International Astronautical Congress, IAC, Guadalajara, Mexico, Sep. 2016.

[C038] M. Möckel, J. Bennett, E. Stoll, and K. Zhang, “High Performance Orbital Propagation Using a Generic Software Architecture,” in Advanced Maui Optical and Space Surveillance Technologies, AMOS, Maui, USA, Sep. 2016.

[C037] K. Soggeberg, M. Becker, and E. Stoll, “Analyse und Beschreibung der Taumelbewegung von Raketenoberstufen infolge der Inhomogenität des. Erdgravitationsfeldes,” in Deutscher Luft- und Raumfahrtkongress, Braunschweig, Germany, Sep. 2016.

[C036] B. Grzesik, E. Farahvashi, M. K. Ben Larbi, C. Trentlage, and E. Stoll, “QuSAD – An Interactive Space Mission Analysis, Design, and Simulation Toolkit,” in International Astronautical Congress, IAC, Guadalajara, Mexico, Sep. 2016.

[C035] M. K. Ben Larbi, M. Luttmann, B. Grzesik, C. Trentlage, and E. Stoll, “Far Range Formation Flight With High Risk Debris in Low Earth Orbit Using Relative Orbital Elements,” in International Astronautical Congress, IAC, Guadalajara, Mexico, Sep. 2016.

[C034] J. Streffing, B. Grzesik, and E. Stoll, “Auswirkung von Faltung auf gedruckte Leiterbahnen und Einsetzbarkeit in entfaltbaren Strukturen für CubeSat Missionen,” in Deutscher Luft- und Raumfahrtkongress, Braunschweig, Germany, Sep. 2016.

[C033] A. Horstmann, C. Wiedemann, E. Stoll, V. Braun, and H. Krag, “Introducing upcoming Enhancements of ESA ’s MASTER,” in AIAA Space 2016, Long Beach, USA, Sep. 2016.

[C032] M. Becker, I. Retat, and E. Stoll, “Active Debris Removal mittels flexiblen Verbindungen: Analyse des Einflusses von Bahnstörungen auf das Gesamtsystem,” in Deutscher Luft- und Raumfahrtkongress, Rostock, Germany, Sep. 2015.

[C031] M. Becker, I. Retat, and E. Stoll, “Determination and Influence of the Ballsitic Coefficient on Tethered Space Systems for Active Debris Removal Missions,” in International Astronautical Congress, Jerusalem, Israel, Sep. 2015.

[C030] C. Wiedemann, M. Möckel, J. Radtke, and E. Stoll, “The Cost-Effectiveness of Post-Mission Disposal Maneuvers,” in International Astronautical Congress, Jerusalem, Israel, Sep. 2015.

[C029] M. Becker, E. Stoll, and I. Retat, “Influence of orbital perturbations on tethered space systems for active debris removal missions,” in AIAA SPACE 2015 Conference and Exposition, Pasadena, California, Aug. 2015.

[C028] C. Trentlage and E. Stoll, “The Applicability of Gecko Adhesives in a Docking Mechanism for Active Debris Removal Missions,” in Advanced Space Technologies in Robotics and Automation, ASTRA, Nordwijk, Netherlands, May 2015.

[C027] C. Wiedemann, A. Horstmann, C. Kebschull, S. Flegel, and E. Stoll, “Die Auswirkung vorsätzlich herbeigeführter Fragmentationsereignisse auf die Weltraummüllumgebung,” in Deutscher Luft- und Raumfahrtkongress, Rostock, Germany, Sep. 2015.

[C026] E. Stoll, C. Trentlage, and M. Becker, “The use of biologically inspired gecko material for active debris removal of high priority objects,” in Deutscher Luft- und Raumfahrtkongress, Rostock, Germany, Sep. 2015.

[C025] C. Kebschull, V. Braun, and E. Stoll, “Determining the Influence on Orbit Prediction Based on Uncertainties in Atmospheric Models,” in International Astronautical Congress, Jerusalem, Israel, Sep. 2015.

[C024] C. Kebschull et al., “Entwicklung eines Messwertgenerators zur Simulation von Sensornetzwerken,” in Deutscher Luft- und Raumfahrtkongress, Rostock, Germany, Sep. 2015.

[C023] H. Enke, J. Letschnik, E. Stoll, and U. Walter, “Satellite Based Search and Rescue Operations Handling using Multi-Sensor UAV,” in Global Space Applications Conference, Paris, France, Jun. 2014.

[C022] E. Stoll, K. Shahid, E. Paasche, and M. Apel, “The Sustainability of the RapidEye Remote Sensing Constellation,” in 4S Symposium on Small Satellites, Systems and Services, Porto Petro, Spain, May 2014, pp. 233–239.

[C021] E. Stoll and K. Shahid, “The Impact of Attitude Control System Agility on the Acquisition Capacity of Remote Sensing Constellations,” in International Astronautical Congress, Toronto, Canada, Sep. 2014.

[C020] H. Enke, J. Letschnik, and E. Stoll, “Satellite-based Services and Products in Support of Disaster Management,” in Global Space Applications Conference, Paris, France, Jun. 2014.

[C019] H. Konstanski, E. Stoll, B. D. Souza, and M. Oxfort, “Four years of operating RapidEye satellites - Continuous performance improvement and adaptation to customer needs and markets,” in IAA Symposium on Small Satellites for Earth Observation, Berlin, Germany, 2013.

[C018] E. Stoll, K. Merz, H. Krag, B. D. Souza, and B. B. Virgili, “Collision Probability Assessment for the Rapideye Satellite Constellation,” in Space Debris Conference, Darmstadt, Germany, Apr. 2013.

[C017] J. Letschnik, E. Stoll, H. Enke, and U. Walter, “End-To-End Measurement Environment for an Electrical Steerable Ka-Band Inter-Satellite Link Antenna,” in International Astronautical Congress, Naples, Italy, Sep. 2012.

[C016] E. Stoll, “Integrating Advanced Calibration Techniques into Routine Spacecraft Operations,” in SpaceOps 2012 Conference, Reston, Virigina, Jun. 2012.

[C015] E. Stoll, R. Schulze, B. D. Souza, and M. Oxfort, “The impact of collision avoidance maneuvers on satellite constellation management,” in Space Surveillance Conference, Madrid, Spain, Jun. 2011.

[C014] E. Stoll, B. D. Souza, H. Konstanski, and M. Oxfort, “2 Years of Operating the RapidEye Constellation – an Evolving Mission Concept and Lessons Learned,” in IAA Symposium on Small Satellites for Earth Observation, Berlin, Germany, Apr. 2011.

[C013] E. Stoll and D. Kwon, “The benefit of multimodal telepresence for in-space robotic assembly,” in IASTED International Conference on Robotics and Applications, Cambridge, USA, Nov. 2009, pp. 36–43.

[C012] E. Stoll, M. Wilde, and C. Pong, “Using Virtual Reality for Human-Assisted In-Space Robotic Assembly,” in World Congress on Engineering and Computer Science 2009, Berkeley, USA, Oct. 2009.

[C011] E. Stoll, J. Letschnik, U. Walter, J. Artigas, and H. Pongrac, “A Test Environment to Demonstrate the Feasibility of Telepresent On-Orbit Servicing,” in International Astronautical Congress, IAC, Glasogow, Scotland, Sep. 2008.

[C010] M. Pietras, S. Ivars, E. Stoll, and M. Wilde, “Concept of a Generic Test Environment for Advanced Spacecraft Systems,” in International Astronautical Congress, IAC, Glasogow, Scotland, Sep. 2008.

[C009] E. Stoll, J. Letschnik, and U. Walter, “On-Ground Testing the Link Maintenance of a Two Degree of Freedom Inter Satellite Link Antenna,” in International Communications Satellite Systems Conference, Seoul, Korea, Jun. 2007.

[C008] E. Stoll and U. Walter, “Test environment for time delay measurements of space links via ARTEMIS,” in ESA International Workshop on Tracking , Telemetry and Command Systems for Space Applications, Darmstadt, Germany, Sep. 2007, no. September.

[C007] E. Stoll, J. Letschnik, U. Walter, S. Clarke, and M. F. Zaeh, “A ground station based test environment for telepresent small satellites,” in Symposium on Small Satellites for Earth Observation, Berlin, Germany, Apr. 2007.

[C006] J. Letschnik, E. Stoll, M. Czech, and U. Walter, “Concept of a Low-cost Satellite Attitude Control Simulator based on an Antenna Turntable,” in European Telemetry Conference, Garmisch, Germany, Mar. 2006.

[C005] J. Letschnik, E. Stoll, M. Czech, and U. Walter, “A Monitoring and Control Tool for pre-optimization of data signal delay in telepresence satellite missions,” in International Communications Satellite Systems Conference, San Diego, USA, Jun. 2006, no. June.

[C004] J. Letschnik, E. Stoll, U. Walter, J. Dallat, and C. Knauer, “The concurrent configuration of a TMTC software during the Satellite Life Cycle,” in SpaceOps, Rome, Italy, Jun. 2006.

[C003] M. Czech, E. Stoll, and U. Walter, “Development of a low cost, medium accurate 2-axes pointing mechanism for small satellites,” in DGLR Jahrestagung, Braunschweig, Germany, Sep. 2006.

[C002] R. Lundin and E. Stoll, “Coverage Time Variation in a Near-Earth Data Relay Satellite System,” in International Astronautical Congress, IAC, Valencia, Spain, Sep. 2006.

[C001] E. Stoll, M. Czech, and U. Walter, “Construction and Realization of a Low-Cost Satellite Attitude Simulator Concept,” in International Communications Satellite Systems Conference, San Diego, USA, Jun. 2006.

 

 

Zusatzinformationen / Extras

Quick Access:

Schnellnavigation zur Seite über Nummerneingabe